SPARK HEATER MIXER
|MODEL||VISSEL CAPACITY LTRS.||BATCH CAPACITY KGS.||DRIVE IN HP||TOOL SPEED||PRODUCT CAPACITY PER/HR|
|SHM – 10||10||5||7.5/10||400/800||25|
|SHM – 130||130||25||20/24||400/800||160|
|SHM – 200||200||35||24/29||400/800||200|
|SHM – 250||250||60||38/40||400/800||280|
|SHM – 300||300||80||51/60||350/700||400|
|SHM – 350||350||100||75/100||350/700||480|
|SHM – 500||500||120||99/125||350/700||600|
From last 15 years spark engineering is in the field of plastic processing machinery and served the industries by supplying more than 800 mixers. Spark R&D team, production, marketing and after sale service team give great support to success the spark to increase the no of machines day by day…
“Spark” heater mixer is a simple physical mixer used to mix solid components frictional heat generated during the process is utilized for mixing hence. Known as “Hot Mixing”. Ac induction motor drives the mixer blade by v-belt for efficient power transmission. We can deliver special application mixer as per customer’s requirement.
- Vessel : fabricated from $. $. 304 material fully polish for easy flow of material. Bottom in curve position to maximum discharge of material degassing system on LID is provided with the valve. Vessel is jacketed for control the frictional heat if required.
- Mixing blade : 3-tier or 2-tier mixing blade made from $. $. 304 material and mirror polish for abrasive and wear resistance. Blade design is suitable for self cleaning the vessel and also reduces the batch time.
- Baffle plate : use for proper mixing of material and give bracking partical downward to the mixing blade for particle reduction and homogeneous mixing.
- Safety feature : Limit switch is provided to stop the motor while the top LED is open and motor is sensor operated while material reach the desired temperature the motor is stopped and save the material.
SPARK HEATER COOLER MIXER
|MODEL||VISSEL CAPACITY LTRS.||BATCH CAPACITY KGS.||DRIVE IN HP||TOOL SPEED||PRODUCT CAPACITY PER/HR||COOLER MIXER||VISSEL CAPACITY LTRS.||DRIVE IN HP||TOOL SPEED|
|DUAL SPEED||SIGNLE SPEED||DUAL SPEED||SIGNLE SPEED|
Spark heater cooler mixer competes with the quality level of products obtained by discontinuous internal mixer . It over comes both processing limitations of traditional mixers as well as mechanical limitations its principle of operation allows continuous production of products with outstanding dispersion at higher capacity.
Advantage Of Heater Cooler Mixer :
- Complete discharge of the mixed material.
- Optimum dispersion and distribution of the compounds of the mixer.
- Compact size of machine.
- Optimum setting of cycle time, Temperature and mixing process.
- Easy to load during loading of raw material, Liquid additives.
- Increase in bulk density of compound those results in higher production.
- Low Compound Cost.
- Higher production rate with clean environment.
- Easy material handling.
Other Specialties :
- Pneumasealed housing to avoid material leakage to the bearing.
- Low maintenance and easy in operation used as versatile.
- Complete discharge the mixed material which save the production cost – inline with heater mixer.
- Increase the cooling surface.
- Water connection from out side the vessel to give moisture less mixing.